Start with the tile material and finish
Choose a tile blade for the material being cut and the finish the job requires. Ceramic, porcelain and vitrified tiles can react differently to heat and feed pressure, so confirm the material before choosing a blade or setting the cutting method.
Why a continuous rim blade
The CF105H is a continuous rim diamond cutting blade. Its continuous cutting edge is intended for tile work where a controlled, consistent cut matters. Keep the tile supported, let the blade work at its own pace, and avoid forcing the cut.
Match blade size and mounting
This product is listed as 4 in / 105 mm with a 16/20 mm bore. Confirm that the blade diameter, arbor arrangement and the machine guard are compatible with your tile saw or cutting equipment before ordering.
Use the approved wet-cutting method
The CF105H product specification lists wet use. Before cutting, confirm the water supply, electrical safety controls and slurry-management requirements for the work area. Follow the tool manufacturer instructions and site safety rules.
Check the listed materials
The product record lists ceramic, porcelain, granite, marble, quarry tile and vitrified tile. Harder materials and different tile bodies can affect cutting speed and blade life, so test the setup on an offcut where the finish is critical.
Before you buy
Check the tile material, required finish, blade diameter, 16/20 mm bore compatibility, machine guard, approved wet-cutting setup and the condition of the tile support. Wear the PPE required by the equipment maker and the site.
Product covered in this guide
CF105H - 4 in / 105 mm Continuous Rim Diamond Cutting Blade, 16/20 mm bore, listed for wet use on ceramic, porcelain, granite, marble, quarry tile and vitrified tile.